CORPORATE PROFILES
I
I
I
I
I

  Router Solution
  ------------------------------------------
Overview
Pro Series Router
Industrial Series Router
Pro Series Network Card
  - Pro LAN Cards
  - Pro CPCI WAN Cards
  - Pro PMC WAN Cards
 
  - PMC 520 Series
  - PMC 600 Series
  - PMC 800 Series
  - PMC 1000 Series
Ind Series Network Card
   
  WAN Monitoring
  ------------------------------------------
WAN monitoring card
WAN monitoring tapper
   
  Technical Support
  ------------------------------------------
Manual Downloads
Technology
Case Study
Technical Notes
FAQ
   

 

 

 

 

 


ImageStream Internet Solution - Pro Series Network Card - PMC 800 Series


PMC 800 Series

ImageStream's PMC 800 series cards are low-cost multi-function IEEE P1386.1 PCI mezzanine WAN adapters for Pro Series routers or OEM products running Linux. The 800 series provides one or two full duplex HDLC interfaces running at speeds up to 52 Mbps per port. The PMC 800 is based on a modular design that provides 1 or 2 HSSI interfaces.

The Hitachi Freedm8 high-speed synchronous controller presents a full duplex clock and data interface to the front-end modules. The Freedm8 processes HDLC frames, manages frame buffering for the local FIFOs and transfers frames directly to host RAM via the PCI bus. The Freedm8 manages link list descriptors and data buffers directly in host RAM. The PMC 800 series is an ideal choice for communication platforms that require low-cost high-performance HSSI interfaces.

Performance:
  • 32-bit 33 MHz PMC interface
  • Low-latency PCI bus master
  • Up to 2 full duplex sync ports
  • 52 Mbps full duplex throughput per port
Interface Options:
  • Single or dual HSSI ports
Environmental Requirements:
  • Operating temperature 0 to 55 degrees C (32 to 131 degrees F)
  • Relative humidity to 90% (non-condensing)
Certification:
  • CE Mark
  • FCC (Class A)
  • FCC Part 15 (Class B)
 Technical Highlights:
  • PCI 2.1 compliant
  • PMC form factor (IEEE P1386.1)
  • 16/32 bit CRC
  • MTBF greater than or equal to 100,000 hours
Interface Specifications:
  • ANSI/TIA/EIA-612-1993 and ANSI/TIA/EIA-613-1993
Power Requirements:
  • 1.6 amps @ 5 volts (max)
  • 0.1 amps @ 12 volts (max)
  • 0.1 amps @ -12 volts (max)
Model Numbers and Interface Configurations:
  • 801-HS - Single HSSI interface
  • 802-HS - Dual HSSI interfaces

Top