Pro
Series LAN adapters include PMC format ethernet cards that provide options for
1, 2, or 4 fast ethernet ports, and 1 or 2 gigabit ethernet ports. Pro Series
LAN cards can be installed in Pro Series routers using three different methods:
(1) mounting on a system board that provides PMC mounting sites, (2) mounting
on a PMC carrier card, or (3) mounting on a packet processing card that provides
PMC sites. ImageStream offers 1, 2, and 4 port 10/100 ethernet
cards for use with Pro Series routers. Each ethernet card provides a CPCI or PMC
bus interface, and can be installed in any available CPCI slot or PMC site. PMC
sites may be provided by the router's system board, a PMC carrier, or a packet
processor. ImageStream also offers 1 and 2 port gigabit ethernet
cards for use with Pro Series routers. Each ethernet card provides a PMC bus interface,
and can be installed in any available PMC site. PMC sites may be provided by the
router's system board, a PMC carrier, or a packet processor. For
monitoring applications, ImageStream offers an ethernet tap that can be used to
transparently monitor a 10/100 ethernet line. The 10/100 tap includes ethernet
ports for input and output, and relays that pass through the ethernet signal even
when the router is powered off. Model Numbers and
Interface Configurations: - PMC-ETH100 - One autosensing
10/100 ethernet port (PMC)
- PMC-ETH100-2 - Two autosensing
10/100 ethernet ports (PMC)
- PMC-ETH100-4 - Four autosensing
10/100 ethernet ports (PMC)
- PMC-ETHGIG-UTP - One UTP gigabit
ethernet port (PMC)
- PMC-ETHGIG-MMF - One multimode fiber
gigabit ethernet port (PMC)
- PMC-ETHGIG-SMF - One single-mode
fiber gigabit ethernet port (PMC)
- PMC-2ETHGIG-UTP - Two UTP
gigabit ethernet ports (PMC)
- PMC-2ETHGIG-MMF - Two multimode
fiber gigabit ethernet ports (PMC)
|