A more intelligent way to implement
VoIP in remote offices and SOHO environments
Tenor AS offers:
SelectNet provides superior voice quality
Transparent MultiPath Call Routing
Integrated H.323 gateway and gatekeeper
SIP User Agent
IVR/RADIUS AAA compliant
Stackable architecture
Answer and Disconnect Supervision
2 or 4 Analog line and trunk interfaces
Up to 4 simultaneous VoIP calls
Available in MultiPath or Gateway configurations
The Quintum® Tenor® AS Series
gives small to medium sized businesses with analog
voice infrastructures an easy, costeffective way to
capitalize on the power of Voice over IP (VoIP). The
Tenor integrates a gateway, a gatekeeper, and intelligent
call routing, and supports QoS all in one solution.
With its MultiPath architecture, the Tenor connects
to the data network through a 10/100 Ethernet interface,
the voice network through either a PBX or phone, and
the public switched telephone network (PSTN).
Patented SelectNet Technology
assures high quality voice.
The Tenor employs its patented SelectNet Technology
to monitor calls for jitter, packet loss and latency,
and can
transparently switch mid-call to the voice network
whenever conditions demand.
More intelligence means greater
flexibility.
With its MultiPath Call Routing, the Tenor can intelligently
route calls between the PBX, the PSTN, and the IP
network, to achieve the best combination of cost and
quality. The Tenor can also route calls over IP to
reduce costs, and then transparently "hop off"
to the PSTN, to reach off-net locations. No other
VoIP solution can match this flexibility.
More intelligence means easier
installation.
With its MultiPath architecture, the Tenor is the
only VoIP solution that can be installed without upgrades
to the existing voice or data networks.
More intelligence means greater
reliability.
The Tenor is designed to pass calls through to the
existing voice network in the event of system malfunction
- even a total power failure.
More intelligence means less
network congestion.
With its PacketSaver Technology, the Tenor reduces
bandwidth consumption up to 57%, by combining voice
packets from several calls into a single packet to
minimize packet overhead.
NATAccess intelligence
means greater security.
The Tenor VoIP MultiPath Switch also features a unique
technology that allows it to operate behind NAT-enabled
firewalls. The innovative NATAccess solution
overcomes the problem of NAT firewalls not correctly
translating internal IP addresses into public addresses
when a VoIP call is established with an outside party.
Call Management Feature:
Automatic call type detection: Voice/Modem/Fax
Answer and Disconnect Supervision
Trunk group support
Public and private dial plan support
User programmable dial plan support
Automated load balancing
Forced IP routing and IP port mapping
Pass-through support for calls to 800, 911,
411, etc.
Automatic appending and stripping of digits
to dialed numbers
Call Detail Records
Least cost routing with external Call Routing
Server
Call Blocking
Type I Caller ID delivery (Telcordia Standard
GR-30-CORE)
Download
Tenor AS Brochure
|