|
ImageStream's PCI 800 series is a low-cost
line of PCI 2.1 compliant WAN adapters used in Industrial
Series routers and OEM products running Linux or Windows.
800 series adapters support one or two full duplex
HDLC interfaces at speeds up to 52 Mbps per port.
The PCI 800 series is based on a modular design that
features a common base card and different interface
modules that support one or two HSSI, DS3 or E3 interfaces.
The 800 series is an ideal choice for HSSI, DS3, and
E3 applications which require a low-cost high-performance
adapter that can support wire-speed performance with
average Internet packet sizes.
The PMC-Sierra Freedm8 high-speed synchronous controller
presents a full duplex clock and data interface to
the front-end modules. The Freedm8 processes HDLC
frames, manages frame buffering for the local FIFOs,
and transfers frames directly to host RAM via the
PCI bus. The Freedm8 uses a link list of descriptors
to manage data buffers directly in host RAM.
|
Performance:
- 32-bit 33 MHz PCI bus master
- Low-latency PCI interface
- Up to 2 full duplex sync ports
- Up to 52 Mbps full duplex throughput
per port
Technical Highlights:
- PCI 2.1 compliant
- 16/32 bit CRC
- MTBF greater than or equal to 100,000
hours
Interface Options:
- Single or dual HSSI interfaces
- Single or dual DS3 interfaces
- Single or dual E3 interfaces
Interface Specifications:
- HSSI: ANSI/TIA/EIA-612-1993 and ANSI/TIA/EIA-613-1993
- DS3: ANSI T1.107-1195 and ANSI T1.404-1994
- E3: ITU G.751
- DS3 and E3 cards use G.703-compliant
75 ohm BNC connectors
|
|
Environmental Requirements:
- Operating temperature 0 to 55 degrees
C (32 to 131 degrees F)
- Relative humidity to 90% (non-condensing)
Power Requirements:
- 1.6 amps @ 5 volts (max)
- 0.1 amps @ 12 volts (max)
- 0.1 amps @ -12 volts (max)
Certification:
- CE Mark
- FCC (Class A)
- FCC Part 15 (Class B)
|
