The PCI 431-TE is ImageStream's lowest-cost
single port T1/E1 adapter for WAN and Internet routing
applications. The 431-TE is a PCI 2.1 compliant adapter
that can terminate fractional and full T1 or E1 circuits.
ImageStream's Industrial Series routers provide the
standard software distribution that is required to
configure the card for fractional or full T1 or E1
operation.
The 431-TE uses a fully integrated design that leverages
the low-cost Intel 21140 to provide an MII to PCI
bus interface. The Xilinx XC3000 FPGA is used to interface
the Conexant 8370 LIU to the MII interface on the
21140.
The 431-TE provides a 32-bit 33 MHz PCI bus interface
that supports both 3.3 and 5 volt signaling systems.
The 431-TE hardware supports async, bisync, and SDLC/HDLC
protocols with a low-latency PCI interface that can
burst into host memory at more than 200 Mbps.
|
Performance:
- 32-bit 33 MHz PCI bus master
- Low-latency PCI interface
Technical Highlights:
- PCI 2.1 compliant
- 3.3 and 5 V compatible signaling
- Short PCI low-profile form factor
- MTBF of at least 100,000 hours
Interface Options:
Environmental Requirements:
- Operating temperature -5 to 55 degrees
C (23 to 131 degrees F)
- Relative humidity 20 to 85% (non-condensing)
Power Requirements:
- 500 milliamps @ 5 volts (max)
|
|
T1 Interface Specifications:
- D4 (SF) and ESF framing
- B8ZS and AMI line coding
- ANSI T1.403, AT&T 54016 and 62411
compliant
- Test and loopback features including
master & slave clocking
- RJ48 connectors
E1 Interface Specifications:
- AMI and HDB3 line coding
- ITU G.703 (120 ohm), G.704, G.706,
G.962
- Test and loopback features including
master & slave clocking
DS3 Interface Specifications:
- ANSI T1.107-1195
- ANSI T1.404-1994
E3 Interface Specifications:
- ITU G.703 (75 ohm)
- ITU G.751
Certification:
- FCC Part 15 (Class A)
- FCC Part 68
- UL 1950, Listed Accessory
- CISPR22 (TUV Rhineland)
- UL Safety
- CS003
- DOC Canada
- CS03
- EN 50082-1, EN 55022, EN 41003
|