Router Solution
  ------------------------------------------
Overview
Pro Series Router
Industrial Series Router
  - Enterprise
  - Gateway 64
  - Gateway
  - Rebel
  - R1
  - TransPort
Pro Series Network Card
Ind Series Network Card
   
  WAN Monitoring
  ------------------------------------------
WAN monitoring card
WAN monitoring tapper
   
  Technical Support
  ------------------------------------------
Manual Downloads
Technology
Case Study
Technical Notes
FAQ
   

 

 

 

 

 

 
ImageStream Internet Solution - Industrial Series Router - R1

  Download

         Data Sheet
  Replacement Guide
        Cisco 1600 series
        Cisco 1700 series
        Cisco 2600 series
        Cisco 3620 series

The R1™ is ImageStream’s low-cost router for varied installation environments. The R1 chassis can be installed in set-top, wallmount, and rackmount environments. In addition, it is available in a ruggedized version that supports extended temperature operation from –5° to 70° C.

The R1 provides one WAN expansion slot and one LAN expansion slot in a small steel chassis that includes a high-performance processor, error-correcting memory, and 10/100 ethernet port. The R1 provides best-in-class flexibility for varied installation environments including set-top, wallmount, and rackmount. The R1 also delivers the ultimate in reliability by using flash storage with no moving parts.

The WAN slot supports Industrial Series network cards including WANic 520 series cards with one, two or four T1, E1, or synchronous serial ports. LAN card options include one 10/100 ethernet port or one token ring port. With add-on network cards, the R1 can route multiple IP networks using 56/64 K DDS, fractional and full T1 or E1, token ring, and ethernet connections.

The R1 leverages ImageStream’s Standard Architecture for Network Drivers (SAND) which includes modular support for WAN protocols including PPP, Cisco HDLC and frame relay. SAND also makes it easy to troubleshoot LAN and WAN connections by providing real-time port status and performance monitoring.

The R1 is ImageStream’s lowest priced Industrial Series router for branch offices and other small-scale routing applications. It offers wire-speed performance and unwavering reliability in a diminutive package. The R1 can usually replace Cisco 1600, 1700, 2500 and 2600 series routers, and it makes an ideal solution for virtual private network (VPN) and quality of service (QoS) applications where wire-speed performance is required.

 

Hardware:

Software:

Processor: Intel
Memory: 64 MB ECC SDRAM
Storage: Fixed flash disk
Network Port: 10/100 ethernet
Management Port: Serial console
Expansion Interface
   One 32-bit 33 MHz PCI slot
   One 32-bit 33 MHz low-profile PCI slot
   for LAN expansion
Wire-Speed Performance*
   Up to four T1s or E1s
Power Supply
   AC Mains Voltage: 85 to 265 VAC
   auto-ranging
   AC Mains Frequency: 47 to 63 Hz
   Power Output: 70 W
Dimensions
   Height: 8 inches (20.3 cm)
   Width: 3.48 inches (8.84 cm)
   Depth: 10 inches (25.4 cm)
Weight: 4 lbs. (1.8 kg)

 

Enterprise Linux™
   Linux kernel
   SAND architecture
   PPP, Cisco HDLC & frame relay
   RIP & OSPF dynamic routing
   Menu-driven configuration
   Real-time performance monitoring
   SNMP monitoring
   IP firewall
   Bandwidth limiting
   Packet filtering
   Port forwarding
   Quality of Service (QoS)
   Interface bonder
   Bridging
   Secure telnet (ssh)
   System scheduler
   IPSec VPN

Options:

LAN Cards
   1 port 10/100 ethernet
WAN Cards
   1, 2, and 4 port sync serial
   1, 2, and 4 port T1 or E1
Model Numbers
   R1-1000 - Base system
   R1-2T1 - Dual T1
   R1-2E1 - Dual E1
   R1-4T1 - Quad T1
   R1-4E1 - Quad E1

 

Highlights:

31-Day Performance Guarantee
1 Year Warranty
Free 24/7 Support for 1 Year
Free Software Upgrades for Life

Note: Terms and specifications are subject to change without notice.
* Please refer to the wire-speed performance note for more information on this specification.

Top